Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Telluride
    4. : How to paint the Kia logo in black on the back of the Kia Telluride.

Kia Telluride - Video tutorial

Model: Kia Telluride MK 1 - Years 2019-2024
Part: Bodywork
Operation: How to paint the Kia logo in black on the back of the Kia Telluride.

In this video, we see how to fix an error that Kia made by writing the model of the car "Telluride" in black and leaving the "Kia" logo in silver. In fact, the combination may not please everyone, and in this case, our YouTuber painted the "Kia" writing in black. Let's see how he did it. We start by cleaning the writing and the surrounding area very well, even with alcohol. We mask the area around with paper and body shop tape. A can of black plastic paint can cost from 9 to 20 euros on major e-commerce platforms. It depends on the brand and the capacity of the canister. When the car is well protected, we start spraying the logo, first horizontally, then vertically, then diagonally, so that it is well covered. Let it dry well. Remove the masking and leave only the tape around the writing. Now, remove the tape around the writing very gently, and you will see that it will also come off from the bodywork. With a pointed wooden stick, refine the writing by removing the small excesses that remain. The job is done. Perfect result.


Posted on 1 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos