Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a KIA K5?

Model: Kia KIA Various
Part: Service warning light

Video tutorial

In this tutorial, you will see how to replace the cabin filter on a KIA K5, an extremely simple and quick operation. First, position yourself in the passenger seat, then disconnect the damper located on the right side, and by pressing both sides of the drawer inward, detach it from the dashboard.

Once done, place it on the ground and open the long rectangular cover by unlocking the relevant clip. At this point, you can remove the old filter, clean the inside of the housing from any debris, and insert the replacement in the correct orientation.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Kia KIA Various .. In this tutorial, you will learn how to reset the service light on a KIA K5. Before performing this simple and quick operation, ensure.. …
Kia KIA Various Resetting the service light on a KIA Cerato, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you hav…
Kia KIA Various In this tutorial, you will see how to reset the service light on the KIA Sportage, a very simple operation to perform only after completing all requi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos