Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on Kia Pegas Soluto

Model: Kia Pegas Soluto MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Front bumper

Video tutorial

In today's video, we will see the main instructions that will allow us to remove and replace the front bumper on the Kia Pegas Soluto. First, open the hood of your car and start removing all the plastic clips found at the top of the front bumper; then remove the additional clips located on both sides of the wheel wells to begin releasing the bumper from the sides, as shown in the video.

Now, unclip and completely remove the front bumper; replace it with the new one by applying the reverse procedure!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Position Light Bulb in the Kia Pegas Soluto?
How to Replace the Position Light Bulb in the Kia Pegas Soluto?
Kia Pegas Soluto (2017-2024 / MK 1) The position light bulb in the Kia Pegas Soluto is easily accessible without needing to disassemble any part of the vehicle. To replace it, whether w…
How to Remotely Program the Key for the Kia Pegas Soluto
Kia Pegas Soluto (2017-2024 / MK 1) In this video, you will learn how to remotely program the key for the Kia Pegas Soluto. The first step is to insert the diagnostic connector into its…
How to Reset the Tire Pressure Light in the Kia Pegas Soluto
How to Reset the Tire Pressure Light in the Kia Pegas Soluto
Kia Pegas Soluto (2017-2024 / MK 1) In the video, we can see the exact procedure to reset the tire pressure light in the Kia Pegas Soluto. In this vehicle, unlike most others, there is …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos