Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of the Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Door trim panel

In this video tutorial, see how to remove the rear door panel of the third generation Kia Sportage in simple steps. First, open the rear door and start by unscrewing the fastening screws found on the sides of the panel, removing the plastic caps first; use a cross-head screwdriver, as shown in the video. At this point, start prying at the sides of the panel to detach and completely remove it; finally, disconnect the handle cable and the electrical connector, applying the reverse procedure for reassembly!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the rear door panel of the Kia Sportage
Guide to disassembling the rear door panel of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) The following steps will show us how to disassemble the rear door panel of the Kia Sportage. First, we open the rear door of the car and start by rem…
Removing the Driver's Door Panel on a Kia Sportage
Removing the Driver's Door Panel on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Want to remove the door panel of a Kia Sportage? Open the car door and locate the panel you need to remove. Unscrew the screw located in the space of…
How to Remove the Door Panel of a Kia Sportage
How to Remove the Door Panel of a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) How do you remove the door panel of a Kia Sportage? This video shows how to proceed. Before starting the disassembly, disconnect the battery terminal…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos