Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the rear door panel of the Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Door trim panel

The following steps will show us how to disassemble the rear door panel of the Kia Sportage. First, we open the rear door of the car and start by removing the plastic cap located inside the handle; then we unscrew the screw found underneath and on the sides of the panel, as shown in the video. At this point, we pry the panel to detach it and remove it, disconnecting the handle cable and the electric connector of the window button; this way it will be possible to access all the internal components of the door!

Posted on 14 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the window buttons of the Kia Sportage
How to replace the window buttons of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this short and simple guide, we will see how to disassemble and replace the front window buttons of the Kia Sportage. First, we open the front doo…
Disassembly of the front door panel of the Kia Sportage
Disassembly of the front door panel of the Kia Sportage
Kia Sportage (2021-2026 / MK 5, NQ5) Today we will discover the process of disassembling the front door panel of the Kia Sportage. First, we open the front door of the vehicle and start …
Removing the Rear Door Panel of the Kia Sportage
Removing the Rear Door Panel of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this video tutorial, see how to remove the rear door panel of the third generation Kia Sportage in simple steps. First, open the rear door and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos