Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel from Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Door trim panel

In this brief tutorial, you will find instructions on how to remove the door panel from a third-generation Kia Sportage. First, open the front door and unscrew the screw, using a Torx screwdriver, located in the grab handle; then remove the triangular plastic piece found at the top and start prying at the sides of the panel to unclip it. To do this, insert a screwdriver into the designated hole at the bottom and remove the panel by unclipping it from the rear clips: finally, disconnect the handle cable and the electrical connector.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Driver's Door Panel on a Kia Sportage
Removing the Driver's Door Panel on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Want to remove the door panel of a Kia Sportage? Open the car door and locate the panel you need to remove. Unscrew the screw located in the space of…
How to Remove the Door Panel of a Kia Sportage
How to Remove the Door Panel of a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) How do you remove the door panel of a Kia Sportage? This video shows how to proceed. Before starting the disassembly, disconnect the battery terminal…
How to Remove the Front Door Panel on a Kia Sportage
How to Remove the Front Door Panel on a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Before you can start, open the front door of your Kia Sportage. Begin by disengaging and removing the panel inserts using a thin but sturdy plastic t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos