Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Kia Venga

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

Video tutorial

If you have just changed the tyres or simply inflated them to the pressure recommended by Kia, you will need to allow the various sensors to perform a new data reading. This way, the warning light will disappear from the dashboard display and you will no longer have any issues.

To perform a new data reading, keep the car running and stationary for about 19 minutes, then drive for several miles at a speed of at least 15 mph. Once done, the TPMS sensors will detect the correct tyre pressure again.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How do you reset the Service light in the Kia Venga?
How do you reset the Service light in the Kia Venga?
Kia Venga (2010-2019 / MK 1) The car featured in the video presented here is the Kia Venga, a car for which we are going to learn how to reset the Service light independently, in…
How to Reset the Service Light on a Kia Venga
How to Reset the Service Light on a Kia Venga
Kia Venga (2010-2019 / MK 1) To reset the service light on a Kia Venga, turn on the instrument panel without starting the engine and wait for the odometer to display. Then, press…
How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos