Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Kia Carens

Model: Kia Carens MK 3 - Years 2013-2019
Part: Headlight bulb

Briefly see how to remove and replace the front headlamp bulb on a Kia Carens. First, open the bonnet of your car and start by removing the plastic cover protecting the bulbs by unscrewing it; then disconnect the electrical connector of the bulb and unclip the metal spring to remove it from the headlamp, as shown in the video. At this point, install the new bulb of the correct type with the same fitting (in this case, type H4); refit the lamp onto the headlight unit and secure the plastic cover!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on a Kia Carens
How to Replace the Headlamp Bulb on a Kia Carens
Kia Carens (2006-2013 / MK 2) Is the headlamp bulb blown? Here’s how to change the bulb on a Kia Carens. Open the bonnet by pulling the lever located at the bottom right of the da…
How to Replace the Dipped Beam Bulb on a Kia Carens
How to Replace the Dipped Beam Bulb on a Kia Carens
Kia Carens (2006-2013 / MK 2) In this video tutorial, learn how to replace the dipped beam bulb on a Kia Carens mk2, produced from 2006 to 2013. First, disconnect the headlamp wir…
Where is the fuse box of the Kia Carens 3 located?
Where is the fuse box of the Kia Carens 3 located?
Kia Carens (2013-2019 / MK 3) If you own a third edition Kia Carens and want to locate the fuse box located inside the engine compartment, all you have to do is follow these steps…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos