Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Kia Carens

Model: Kia Carens MK 2 - Years 2006-2013
Part: Headlight bulb

In this video tutorial, learn how to replace the dipped beam bulb on a Kia Carens mk2, produced from 2006 to 2013. First, disconnect the headlamp wiring. Next, remove the two screws securing the headlamp in place, one located at the front and the other above the headlamp, then take it out. Once the headlamp is removed from the vehicle, unscrew the central cap at the back where you will find the dipped beam bulb to be changed. Disconnect the bulb connector and remove the bulb, then fit a new bulb and reassemble everything by following the procedure in reverse.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Kia Carens
How to Replace the Front Headlamp Bulb on a Kia Carens
Kia Carens (2013-2019 / MK 3) Briefly see how to remove and replace the front headlamp bulb on a Kia Carens. First, open the bonnet of your car and start by removing the plastic c…
Where is the fuse box of the Kia Carens 3 located?
Where is the fuse box of the Kia Carens 3 located?
Kia Carens (2013-2019 / MK 3) If you own a third edition Kia Carens and want to locate the fuse box located inside the engine compartment, all you have to do is follow these steps…
How to Remove the Spare Wheel on a Kia Carens
Kia Carens (2022-2026 / MK 4) Removing the spare wheel from your new Kia Carens is very simple, and in this guide, you will find all the necessary instructions to perform this ope…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos