Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the reverse light bulbs in the KIA Sportage?

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Tail light bulb

As seen in this tutorial, replacing the reverse light bulbs in the KIA Sportage is a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Start by going underneath the vehicle on the side you will be working on, then remove the indicated plastic rivets and move the cover. Next, locate the relevant bulb holder, turn it slightly counter-clockwise, and remove it from the housing. At this point, you can remove the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Kia Sportage
How to Replace the Rear Headlight Bulbs on a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Are the rear lights of your Kia Sportage not working? Follow this guide to replace the damaged bulbs after removing the rear light. Open the boot lid…
How to Replace the Reversing Switch on a Kia Sportage
How to Replace the Reversing Switch on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this video tutorial, see how to replace the reversing switch on a Kia Sportage. The first step is to purchase a new reversing switch from an autho…
How to Remove the Rear Headlight Bulb on a Kia Sportage
How to Remove the Rear Headlight Bulb on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before starting, open the tailgate of your Kia Sportage. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos