Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel on the Kia Sedona

Model: Kia Sedona VQ - Years 2006-2014
Part: Door trim panel

In today's video tutorial, you will learn how to remove and replace the front door panel on the Kia Sedona by following these simple steps. First, open the front door and start removing the plastic caps found on the panel; then, unscrew the screws located underneath, as shown in the video. At this point, unscrew the additional screws located on the sides of the panel; pry the sides to detach and remove it, disconnecting the handle cable and the electrical connector for the window switch; all that's left is to reassemble everything!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Sedona (2002-2005 / KV-II) In this brief and simple guide, you will find instructions to remove and replace the front shocks on the Kia Sedona and Carnival. First, lift the veh…
Kia Sedona (2006-2014 / VQ) If you want to find out how to replace the front headlight bulb of your second generation Kia Sedona (2006-2014), just read this new guide carefully …
Kia Sedona (2015-2021 / YP) In this video, we can see where the fuse boxes are located in the KIA Sedona and their respective diagrams, useful in case we need to check the fuses…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos