Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Air Fan Malfunction on the Kia Sedona

Model: Kia Sedona YP - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Blower motor

See other generations:
Video tutorial

As shown in the video, it is possible that suddenly the fan on the Kia Sedona stops working properly, only operating at speeds 1 and 4. You can fix the problem by purchasing a replacement controller and removing the compartment under the glove box on the passenger side.

You will need to remove two screws on each side.

Once the compartment is removed, you will see the actual switches associated with various fuses and relays. Disconnect the controller from the electrical connector and replace it. Ensure there is no oxidation and that the new unit fits securely into the connector.

Position the connector in place and screw it in to make it stable. Test if the fan works and reassemble everything as it was before.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Kia Sedona?
Where are the fuses located in the Kia Sedona?
Kia Sedona (2015-2021 / YP) Each fuse in the Kia Sedona is located inside one of the designated fuse boxes installed in the vehicle: in this type of car, you will find two boxes…
How to Replace the Key Battery in a KIA Sedona
How to Replace the Key Battery in a KIA Sedona
Kia Sedona (2006-2014 / VQ) Replacing the key battery in your KIA Sedona Mk1 is one of the simplest DIY maintenance tasks you can perform. Below are all the necessary steps. Fir…
How to Replace the Key Battery for the Kia Sedona
How to Replace the Key Battery for the Kia Sedona
Kia Sedona (2015-2021 / YP) In this guide, you will find the steps necessary to correctly change the battery of your Kia Sedona Mk2 key. First, get a flathead screwdriver and in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos