Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from a Kia Seltos?

Model: Kia Seltos MK 1 - Years 2019-2026
Part: Door trim panel

To remove the door panel from a Kia Seltos, use a tool to pry off the triangular cover near the outside rearview mirror. Once this cover is removed, unscrew the screw that secures the panel, located near the window switch. At this point, the panel will be free and can be detached from the area where the triangular panel was previously located. By disconnecting the connectors, you can completely remove the panel and replace it with a new one.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Taillight from a Kia Seltos?
How to Remove the Taillight from a Kia Seltos?
Kia Seltos (2019-2026 / MK 1) Removing the taillight from a Kia Seltos is a task anyone can handle. The taillight is held in place by just two screws, which you can easily see whe…
How to reset the TPMS light on the 2022 Kia Seltos
How to reset the TPMS light on the 2022 Kia Seltos
Kia Seltos (2019-2026 / MK 1) If you want to manually reset the TPMS light on your 2022 Kia Seltos, you need to pay attention to the following procedure and follow all the steps. …
How to Replace the Windshield Wiper Blades on a Kia Seltos
How to Replace the Windshield Wiper Blades on a Kia Seltos
Kia Seltos (2019-2026 / MK 1) To replace the windshield wiper blades on a Kia Seltos, lift the wiper arms so that they do not contact the windshield. Next, press the side clips of…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos