Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windshield Wiper Blades on a Kia Sedona?

Model: Kia Sedona YP - Years 2015-2021
Part: Windshield wipers

To replace the windshield wiper blades on a Kia Sedona, lift the wipers so they are not in contact with the windshield. Then, remove the clip that connects the blades to the corresponding arms. By prying at the connection point, you can remove the blade and slide it down. After removal, install the new blades and connect them to the appropriate arms. Once installed, position the blades on the windshield to ensure they are correctly installed.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Sedona (2015-2021 / YP) To replace the thermostat on a Kia Sedona, open the hood to access the components inside the engine bay. On the left side of the engine block, locate…
Kia Sedona (2015-2021 / YP) In this guide, you will find the steps necessary to correctly change the battery of your Kia Sedona Mk2 key. First, get a flathead screwdriver and in…
Kia Sedona (2015-2021 / YP) Today, let's go over the instructions for performing the routine maintenance oil change on the Kia Sedona. First, lift the vehicle and start draining…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos