Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the tyre pressure sensor fuse located in the Kia Optima?

Model: Kia Optima / K5 JF, MK 4 - Years 2015-2020
Part: Fuse box

This YouTuber has created a rather interesting video to show us where the fuse connected to the tyre pressure sensor is located and how to replace it in the Kia Optima. The fuse in question, or rather the fuses since there are two, are located inside the cabin, in the fuse box on the driver's side, under the dashboard behind the designated panel. The video shows us exactly which fuses these are. The first is located in the fourth position of the third row while the second is the one at the bottom. To extract and replace them, you can use the designated fuse puller.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Kia Optima
How to reset the TPMS light on the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) Today we will explain how to reset the tire pressure warning light on a 2011 Kia Optima. To perform the reset, we will need to use a scanner. Turn on…
How do you reset the tire pressure light on the Kia Optima?
How do you reset the tire pressure light on the Kia Optima?
Kia Optima / K5 (2015-2020 / JF, MK 4) The procedure for resetting the tire pressure warning light on the Kia Optima is done by first inflating the tires that are not at a sufficient press…
How do you reset the tire pressure light on the Kia Optima?
How do you reset the tire pressure light on the Kia Optima?
Kia Optima / K5 (2015-2020 / JF, MK 4) To reset the tire pressure light of the Kia Optima, you need to inflate the tires until they reach the recommended pressure value: this value will be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos