Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement on a Kia Venga

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

This video is currently unavailable

In this brief video guide, you will see the step-by-step procedure for replacing the wiper blades on a first-generation Kia Venga, produced from 2010 to 2019. First, lift the wiper arm, then unlock the wiper blade attachment as shown in the video and remove it. Once this is done, insert the new wiper blade and lower the arm. Finally, to complete the job, repeat the same operation on the other wiper blade.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…
How to Replace the Battery on a Kia Venga
How to Replace the Battery on a Kia Venga
Kia Venga (2010-2019 / MK 1) Open the bonnet of your Kia Venga. Move the battery cover aside. Next, unscrew and remove the screws securing the two terminals to the battery, then …
Where are the fuses located in the Kia Venga?
Where are the fuses located in the Kia Venga?
Kia Venga (2010-2019 / MK 1) In the Kia Venga, the fuses are contained within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The first is…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos