Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio in a Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Car stereo

This video tutorial shows the entire procedure needed to replace the radio in a fourth-generation Kia Sportage, produced from 2016 to 2022. Start by removing the plastic trim beneath the radio using a small plastic lever, as shown in the video. Next, unscrew the two screws holding the radio fascia in place and remove it along with the air vents. Once done, unscrew the four screws securing the radio, two on each side, and pull it out. Disconnect all wiring, and finally, remove it completely. Once the old radio is extracted, you can install a new one by following the reverse procedure.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Standard Radio in a Kia Sportage
How to Reset the Standard Radio in a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Below, we will see the instructions that will allow you to reset the standard radio in a Kia Sportage in simple steps: First, get inside the vehicle …
How to Replace the Car Radio in a KIA Sportage?
How to Replace the Car Radio in a KIA Sportage?
Kia Sportage (2004-2010 / MK 2, KM) As shown in this tutorial, replacing the car radio in a KIA Sportage is an extremely simple and quick operation. First, unclip the centre console con…
How to disassemble the original radio of the Kia Sportage
How to disassemble the original radio of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) In this guide we will see the instructions that will allow us to disassemble and replace the original radio of the Kia Sportage, in simple steps. Fir…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos