Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the TPMS on a Kia Rio

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

If a warning light shaped like a tyre with an exclamation mark appears on the instrument panel of the Kia Rio, it means the system has detected a drop in pressure in one of the tyres. Check with a gauge as soon as possible, and if necessary, restore the correct inflation values with a compressor, after which reset the control system.

Turn on the ignition, press the button located on the dashboard to the left of the steering column for three seconds, which has a marking similar to the orange warning light. After the time has elapsed, the light will flash for four seconds, confirming the reset.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

Resetting the tyre pressure warning light on the Kia Rio
Resetting the tyre pressure warning light on the Kia Rio
Kia Rio (2016-2023 / MK 4, SC, YB) Below are the instructions to reset the tyre pressure monitoring system (TPMS) warning light on the Kia Rio; before performing the reset, ensure that…
Resetting the Tyre Pressure Warning Light (TPMS) on the Kia Rio
Resetting the Tyre Pressure Warning Light (TPMS) on the Kia Rio
Kia Rio (2017-2023 / ) In this video tutorial, learn how to reset the tyre pressure warning light on the Kia Rio; before performing the reset operation, ensure all four tyr…
How to reset the TPMS of the Kia RIO
How to reset the TPMS of the Kia RIO
Kia Rio (2016-2023 / MK 4, SC, YB) These short and simple instructions will show us how to reset the tire pressure warning light of the Kia RIO; before resetting the TPMS sensors, it i…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos