Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Boot Lid on a KIA Carens?

Model: Kia Carens MK 3 - Years 2013-2019
Part: Checks and maintenance

On a KIA Carens, the boot lid may become stuck due to a problem with the lock actuator or its control module. In this case, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the left rear door, then operate the indicated lever and lower the seat backrest. Next, go into the boot, locate the small access panel, and remove it. You can now manually operate the actuator to open the boot lid.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the spare wheel in the KIA Carens?
How to remove the spare wheel in the KIA Carens?
Kia Carens (2022-2026 / MK 4) In this tutorial we can see how to remove the spare wheel in the KIA Carens, an extremely simple and quick operation, to be carried out for example i…
Where Are the Fuses Located in the Kia Carens?
Where Are the Fuses Located in the Kia Carens?
Kia Carens (2013-2019 / MK 3) The fuses in the Kia Carens are located inside one of the fuse boxes present in the vehicle, of which there are two in this model. The first is posit…
Where is the fuse box of the Kia Carens 3 located?
Where is the fuse box of the Kia Carens 3 located?
Kia Carens (2013-2019 / MK 3) If you own a third edition Kia Carens and want to locate the fuse box located inside the engine compartment, all you have to do is follow these steps…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos