Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Kia Picanto.

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Tail light

Replacing the rear headlight bulb of the Kia Picanto is a very simple operation. We start by opening the rear hood of the car and removing the two Torx screws that hold the headlight in place. Once the screws are removed, it will be possible to remove the headlight from its housing. To replace the bulb, we will need to disconnect the connector at the bottom and then remove it by rotating the cover of its light fixture. Proceed by removing the bulb and inserting a new one. Connect the connector and close the cover, insert the headlight into its housing and tighten it with the screws. Test the operation of the bulb and close the rear hood.

Posted on 8 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Replace Headlight Bulbs on Kia Picanto
Replace Headlight Bulbs on Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Are the bulbs on your Kia Picanto damaged? Here’s how to change them from inside the front headlights. Open the front bonnet by pulling the lever loc…
How to replace the front headlight bulb of the Kia Picanto
How to replace the front headlight bulb of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replace the bulb of the right front headlight of the Kia Picanto. Model produced from 2011 to 2017, it is a really simple and quick operation to be c…
How to Replace the Headlight Bulb on a Kia Picanto
How to Replace the Headlight Bulb on a Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Today's instructions will show you how to dismantle and replace the headlight bulb on a Kia Picanto in simple steps. First, open the bonnet of the ve…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos