Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the gear knob and gear lever gaiter of the Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Shift knob

Let's briefly see the instructions for disassembling and replacing the knob and shift boot of the Kia Rio, in simple and quick steps. First, we get into the car and gently detach the shift boot; then we unscrew the shift knob counterclockwise until it is completely removed, as shown in the video. At this point, if necessary, we also replace the shift boot; first, we reassemble the boot and then the knob on the lever, screwing it clockwise, making sure it is securely attached to the shift lever!

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Knob on a Kia Rio
Removing the Gear Knob on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Remove the gear knob from the Kia Rio. Grip the knob with your hands and rotate it to the left (as if you were unscrewing anything), then pull it off…
How to replace the gear knob on the 2014 Kia Rio
How to replace the gear knob on the 2014 Kia Rio
Kia Rio (2011-2017 / UB, MK 3) In this new guide for owners of the 2014 Kia Rio, discover how to correctly and quickly replace the gear knob, one of the most used components in the…
How to Replace the Gear Knob on the 2014 Kia Rio
How to Replace the Gear Knob on the 2014 Kia Rio
Kia Rio (2011-2017 / UB, MK 3) In this video, see how to replace the gear knob of the 2014 Kia Rio: the knob recommended by the YouTuber can be found on AliExpress under code 10050…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos