Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Exc 300

In this video tutorial, we will see how to locate the pressure sensor of the KTM EXC 300 motorcycle, in simple and quick steps. First of all, we put the motorcycle on the stand and start disconnecting and removing the plastic cover found on the side, air filter side; then we find the pressure sensor fixed on the fairing, as shown in the video. At this point, we disconnect the electrical connector of the sensor and unscrew the screw to remove it, replacing it if necessary with a new one; we install it correctly and make the connection, finally reassembling the fairing!

Posted on 19 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Thermostat from the KTM EXC 300
Guide to Removing the Thermostat from the KTM EXC 300
Exc 300 In this brief guide, you will find instructions to remove and replace the thermostat of the KTM EXC 300 enduro bike, as well as the 125 and 250 model…
How to Dismantle the Engine of the KTM EXC 300
How to Dismantle the Engine of the KTM EXC 300
Exc 300 To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the…
How to Replace the Coolant on the KTM EXC 300
How to Replace the Coolant on the KTM EXC 300
Exc 300 Watch this short video tutorial on how to replace the coolant or antifreeze on a KTM EXC 300 enduro bike. First, remove the radiator cap located to t…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos