Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the KTM SX-F 250?

Model: Ktm Sxf 250
Part: Engine oil

Video tutorial

It will be possible to replace the engine oil of the KTM SX-F 250 by loosening the drain plug located in the central lower part of the bike: once the piece has been removed, it will be possible to drain all the old oil into a properly positioned container.

Then, the oil filter located in the same position must also be removed in order to insert the new one: the new filter must be inserted and then topped up. The necessary amount of oil must be poured through the vent on the right side of the vehicle.


Posted on 18 August 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a KTM SXF 250
How to Change the Engine Oil on a KTM SXF 250
Sxf 250 .. To change the engine oil on the KTM SXF 250, loosen the drain plug located at the central lower part of the bike. Once this plug is removed,.. …
How to change the engine oil on a KTM SXF 250?
How to change the engine oil on a KTM SXF 250?
Sxf 250 .. for changing the engine oil on the KTM SXF 250 involves loosening the drain plug of the oil sump, located at the central lower part of the bike:.. …
How to Remove the Starter Motor from the KTM SXF 250
How to Remove the Starter Motor from the KTM SXF 250
Sxf 250 .. and replacing the starter motor of the KTM SXF 250. First, place the bike on a stand and locate the starter motor, situated on the right side of the.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos