Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on a KTM SXF 250?

Model: Ktm Sxf 250
Part: Engine oil

Video tutorial

The procedure for changing the engine oil on the KTM SXF 250 involves loosening the drain plug of the oil sump, located at the central lower part of the bike: once the plug has been removed, you can collect the used oil in a suitably positioned container.

After the oil has completely drained out, you can remove the oil filter from the lower left side of the bike and replace it with a new one. After replacing, you can top up by pouring oil through the breather on the right side of the bike.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a KTM SXF 250
How to Change the Engine Oil on a KTM SXF 250
Sxf 250 To change the engine oil on the KTM SXF 250, loosen the drain plug located at the central lower part of the bike. Once this plug is removed, collect …
How to Remove the Starter Motor from the KTM SXF 250
How to Remove the Starter Motor from the KTM SXF 250
Sxf 250 Today, we will see the main instructions useful for removing and replacing the starter motor of the KTM SXF 250. First, place the bike on a stand and…
How do you replace the engine oil of the KTM SX-F 250?
How do you replace the engine oil of the KTM SX-F 250?
Sxf 250 It will be possible to replace the engine oil of the KTM SX-F 250 by loosening the drain plug located in the central lower part of the bike: once the…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos