Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let's discover the steps and instructions on how to perform the routine maintenance service by replacing the engine oil and oil filter on a KTM Adventure 990. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and top up with new engine oil until reaching the maximum level mark.

Posted on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the KTM Adventure 990
How to replace the engine oil and oil filter of the KTM Adventure 990
Adventure 990 To replace the engine oil and oil filter, no special tools are needed; let's see how to perform the service on the KTM Adventure 990. First, place th…
How do you replace the clutch of the KTM Adventure 990?
How do you replace the clutch of the KTM Adventure 990?
Adventure 990 It will be possible to replace the clutch of the KTM Adventure 990 by loosening the screws that secure the panel on the right side of the motorcycle.…
How to Replace the Air Filter in the KTM Adventure 990
How to Replace the Air Filter in the KTM Adventure 990
Adventure 990 In this tutorial, see how to replace the air filter in the KTM Adventure 990, a very simple and quick operation. First, insert the key into the left …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos