Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the KTM RC 390?

Model: Ktm Rc 390
Part: Battery

Video tutorial

You can replace the battery on the KTM RC 390 by completely removing the seat from its housing: once the seat is removed, you will be able to locate the screws underneath that secure the fuel tank to its housing. Once the tank is freed from the corresponding screws, you can also disconnect the hoses and connectors to remove it entirely: here you will find the battery connected to the appropriate cables.

By disconnecting them and loosening the screws of its supports, you will be able to extract it and replace it with a new one.


Posted on 11 July 2026 by ScegliAuto


Related tutorials

Battery Replacement on KTM RC 390
Battery Replacement on KTM RC 390
Rc 390 In this tutorial, you will learn how to remove and replace the battery on a KTM RC 390. First, remove the rider's seat and pull the lever to release …
How to Replace the Air Filter on the KTM RC 390 - Duke 390
How to Replace the Air Filter on the KTM RC 390 - Duke 390
Rc 390 In this video tutorial, you will find instructions to remove and replace the engine air filter on the KTM RC 390, as well as the Duke 390. First, rem…
Where is the battery located in the KTM RC 390?
Where is the battery located in the KTM RC 390?
Rc 390 In this video, you can see where the battery is located in the KTM RC 390 and how to access it, which is useful if you need to replace it, a very sim…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos