Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on KTM RC 390

Model: Ktm Rc 390
Part: Battery

Video tutorial

In this tutorial, you will learn how to remove and replace the battery on a KTM RC 390. First, remove the rider's seat and pull the lever to release the fuel tank cover, as shown in the video; this will give you access to the battery compartment. Next, disconnect the two battery terminals (positive and negative) using a cross-head screwdriver or preferably a socket spanner; extract the old battery and replace it with the correct new one. Finally, reassemble everything by following the reverse procedure!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on the KTM RC 390?
How to Replace the Battery on the KTM RC 390?
Rc 390 You can replace the battery on the KTM RC 390 by completely removing the seat from its housing: once the seat is removed, you will be able to locate …
How to remove the right side fairing of a KTM RC 390
How to remove the right side fairing of a KTM RC 390
Rc 390 Before starting, it is advisable to position your KTM RC 390 upright. Begin by unscrewing and removing the internal and external screws that secure t…
Replace the Brake and Clutch Levers on the KTM RC 390
Replace the Brake and Clutch Levers on the KTM RC 390
Rc 390 In this brief and simple guide, learn how to remove and replace the brake and clutch levers on the KTM RC 390 motorcycle. First, remove the clutch le…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos