Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the right side fairing of a KTM RC 390

Model: Ktm Rc 390
Part:

Video tutorial

Before starting, it is advisable to position your KTM RC 390 upright. Begin by unscrewing and removing the internal and external screws that secure the fairing to the bike, located around the perimeter of the fairing.

Next, unclip and remove the clips that hold the fairing in place. This will free the right side fairing.

At this point, you can remove the fairing from its housing. Once you have completed this step, you will have successfully removed the right side fairing of your KTM RC 390.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Change the Coolant on a KTM RC 390
How to Change the Coolant on a KTM RC 390
Rc 390 In this tutorial, we will see how to drain and replace the coolant on a KTM RC 390. First, remove the left side fairing to access the radiator cap; t…
Replacing the Front Headlight Bulb on the KTM RC 390
Replacing the Front Headlight Bulb on the KTM RC 390
Rc 390 In this video tutorial, we will go through the main steps to remove and replace the front headlight bulb on the KTM RC 390 motorcycle. First, remove …
How to Change the Engine Oil in the KTM RC 390?
How to Change the Engine Oil in the KTM RC 390?
Rc 390 In this tutorial, we will see how to change the engine oil in the KTM RC 390, a very simple and quick operation. First, wait until the engine is cool…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos