Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter of the KTM Duke 790

Model: Ktm Duke 790
Part: Engine oil

Video tutorial

Here are the instructions for performing routine maintenance by changing the engine oil and oil filter of the KTM Duke 790. First, place the motorcycle on its stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, unscrew the screws of the oil filter cover, replacing the cartridge with a new one, as shown in the video.

At this point, unscrew the filler cap and top up with new engine oil, starting the engine and topping up as necessary afterwards.


Posted on 9 August 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter on the Ktm Duke 790
How to replace the engine oil and oil filter on the Ktm Duke 790
Duke 790 Today, we will go through the procedure for performing routine maintenance by replacing the engine oil and oil filter on the Ktm Duke 790. First, pla…
How to Service the Ktm Duke 790
How to Service the Ktm Duke 790
Duke 790 This guide will show you how to perform the routine maintenance service on the Ktm Duke 790 by replacing the engine oil and oil filter. First, place …
How to replace the engine oil in the KTM Duke 790?
How to replace the engine oil in the KTM Duke 790?
Duke 790 In this tutorial we can see how to replace the engine oil in the KTM Duke 790, an extremely simple and fast operation. First of all, make sure that t…

How to Change the Engine Oil of a Keeway Sip 125?

To replace the engine oil of a Keeway Sip 125 scooter, start by positioning the scooter on a flat surface. Next, lift the scooter using the centre stand. Then, remove the oil filler cap. This will allow air to enter the system and facilitate the oil drainage. Place a container under the drain plug and unscrew the plug using a spanner. Once the drain plug is removed, let the used oil drain completely into the container. After that, re-screw the drain plug, fill the engine with new oil, check the level, and start the scooter to distribute the oil evenly. At this point, you will have completed the engine oil change for your Keeway Sip 125.

Watch the video!


by ScegliAuto

More videos