Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulb on KTM 450 Exc

Model: Ktm Exc 450
Part: Headlight bulb

Video tutorial

Remove the front fairing that contains the headlamp. To do this, you must also disconnect the connector attached to the bulb.

Once you have the fairing with the headlamp in hand, place it on a workbench. Remove the rubber cover located at the back of the headlamp, then lift the metal clip and extract the bulb.

For reassembly, proceed in reverse: insert the new bulb you purchased, secure it with the metal clip, and replace the rubber cover. Connect the bulb to the connector and refit the fairing onto the motorcycle.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How do you replace the front headlight of the KTM EXC 450?
How do you replace the front headlight of the KTM EXC 450?
Exc 450 To replace the front headlight of the KTM EXC 450, you need to loosen the screws that secure the front fairing panel to its housing: these screws wil…
Engine Oil and Oil Filter Replacement for the KTM EXC 450
Engine Oil and Oil Filter Replacement for the KTM EXC 450
Exc 450 In this video, we will see how to carry out the routine maintenance service for the oil change on the KTM EXC 450 enduro bike. First, remove the meta…
How do you dismantle the engine of the KTM EXC 450?
How do you dismantle the engine of the KTM EXC 450?
Exc 450 It will be possible to completely disassemble the engine of the KTM EXC 450 by unscrewing the screws that secure it to its housing, at the lower cent…

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos