Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Brake and Clutch Levers on KTM 250 XC-W

Model: Ktm Xc 250
Part:

This video is currently unavailable

In this short video, you will learn how to remove and replace the brake and clutch levers on a KTM XC 250 enduro bike in simple and quick steps. Start by removing the clutch lever, unscrewing the fixing pin; use two spanners to unscrew the pin and the lower nut. At this point, disconnect the clutch cable to replace the lever; insert the cable into its housing and reassemble everything.

Now unscrew the pin of the front brake lever, removing the lever; insert the new one and follow the reverse procedure for reassembly!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing Front Brake and Clutch Levers on KTM XC 250
Xc 250 In this guide, you will learn how to remove and replace the brake and clutch levers on a KTM XC 250. First, remove the protective rubber from the lev…
How to Replace the Grips on a KTM XC 250
Xc 250 In this short and simple guide, we will cover the steps to remove and replace the grips on the handlebars of the KTM XC 250 enduro bike. First, place…
How to Replace the Rear Shock Absorber on the KTM XC 250?
How to Replace the Rear Shock Absorber on the KTM XC 250?
Xc 250 To replace the rear shock absorber on the KTM XC 250, you need to unscrew the bolts that secure it in its housing: these bolts are located at the bot…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos