Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on the KTM XC 250?

Model: Ktm Xc 250
Part: Shocks

Video tutorial

To replace the rear shock absorber on the KTM XC 250, you need to unscrew the bolts that secure it in its housing: these bolts are located at the bottom near the swingarm and at the top just below the mudguard. Once all these bolts have been loosened, you can extract the old shock absorber by sliding it out from the bottom of the swingarm: this way, you can insert the new shock absorber, securing it with the appropriate bolts at both the top and bottom, ensuring it functions correctly.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to replace the transmission oil seal on the KTM XC 250
How to replace the transmission oil seal on the KTM XC 250
Xc 250 This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250…
How to Replace the Grips on a KTM XC 250
Xc 250 In this short and simple guide, we will cover the steps to remove and replace the grips on the handlebars of the KTM XC 250 enduro bike. First, place…
How to Replace the Starter Motor on a Ktm XC 250
How to Replace the Starter Motor on a Ktm XC 250
Xc 250 In this video tutorial, you will see instructions on how to remove and replace the starter motor on the Ktm XC 250 two-stroke enduro bike. First, rem…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos