|
Do it yourself
| |||
| ||||
Model: Ktm Exc 300
In today's video, you will learn how to remove and replace the sprocket on a KTM XC 300 enduro bike in simple and quick steps, applicable to other engine sizes as well. First, position the bike on a stand and start by removing the sprocket cover; then, unscrew the sprocket retaining nut using a 17 mm socket. At this point, disconnect the chain and remove the sprocket, replacing it with a new one (with the correct tooth count); check the internal condition of the oil seal and then reassemble everything!
Updated on 18 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 300
To replace the sprocket on the KTM EXC 300, you need to loosen the nut that secures the central pin and remove it; once the nut is removed, you can l…
Exc 300
In this guide, you will learn the main instructions on how to remove and replace the front tyre on the KTM EXC 300 enduro bike. First, place the bike…
Exc 300
Below are the instructions that will allow you to carry out the regular maintenance service by changing the engine oil on the KTM EXC 300 enduro bike…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |