Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Lc8 950 Adventure

Change the Engine Oil and Oil Filter on a KTM LC8 950 Adventure

Model: Ktm Lc8 950 Adventure
Part: Oil filter

This video is currently unavailable

In this video tutorial, you will see step-by-step instructions for performing the routine maintenance oil change on the KTM LC8 950 Adventure motorcycle. First, position the stand on your bike and start by removing the engine oil drain bolt, allowing it to drain into a container for about ten minutes; then unscrew the two screws of the oil filter cover, as shown in the video.

At this point, remove and replace the filter with a new one, reassemble everything, and finally pour the new oil into the crankcase!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Replace the Engine Oil and Oil Filter of the Ktm Superduke 990 LC8
Replace the Engine Oil and Oil Filter of the Ktm Superduke 990 LC8
Superduke 990 Lc8 Today, follow this brief and simple guide to perform the routine maintenance service by replacing the engine oil and oil filter on the Ktm Superduke …
Service on KTM 950 Adventure
Service on KTM 950 Adventure
950 Adventure Start the engine for a few minutes to warm the oil, making it less viscous and facilitating drainage. Unscrew the bolt that acts as a plug for the lo…
How to Replace the Engine Oil and Oil Filter of the Ktm Adventure 790 R
How to Replace the Engine Oil and Oil Filter of the Ktm Adventure 790 R
Adventure 790 R Today, discover how to replace the engine oil and oil filter on the Ktm Adventure 790 R enduro bike by following these simple steps. First, place you…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos