Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Superduke 990 Lc8

Replace the Engine Oil and Oil Filter of the Ktm Superduke 990 LC8

Model: Ktm Superduke 990 Lc8
Part: Engine oil

Video tutorial

Today, follow this brief and simple guide to perform the routine maintenance service by replacing the engine oil and oil filter on the Ktm Superduke 990 LC8. First, place your motorcycle on a stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cover, replacing the cartridge with a new one as shown in the video.

At this point, unscrew the filler screw and top up with new oil!


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter on a KTM LC8 950 Adventure
Lc8 950 Adventure In this video tutorial, you will see step-by-step instructions for performing the routine maintenance oil change on the KTM LC8 950 Adventure motorcy…
How to Replace the Engine Oil and Oil Filter on a KTM Adventure 990
How to Replace the Engine Oil and Oil Filter on a KTM Adventure 990
Adventure 990 Let's discover the steps and instructions on how to perform the routine maintenance service by replacing the engine oil and oil filter on a KTM Adven…
How to replace the engine oil and oil filter of the KTM Adventure 990
How to replace the engine oil and oil filter of the KTM Adventure 990
Adventure 990 To replace the engine oil and oil filter, no special tools are needed; let's see how to perform the service on the KTM Adventure 990. First, place th…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos