Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Engine Oil and Oil Filter on KTM EXC-F 500 (2021)

Model: Ktm Exc F 500
Part: Engine oil

Video tutorial

Let’s see how to perform routine maintenance by changing the engine oil and oil filter on a 2021 KTM EXC-F 500 enduro bike. First, remove the lower engine guard by unscrewing the fastening screws; then remove the oil drain bolt located under the engine using a socket spanner.

Next, unscrew the screws of the oil filter cover found on the left; then remove the filter and replace it with the correct new one. Finally, pour the new oil into the crankcase, filling it to the correct level!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Ktm Exc 500
How to Change the Engine Oil of the Ktm Exc 500
Exc F 500 In this brief and simple guide, we will outline the procedure to change the engine oil and oil filter of the Ktm Exc 500 enduro bike. First, place th…
How to Perform an Oil Change on the Ktm EXC-F 500
How to Perform an Oil Change on the Ktm EXC-F 500
Exc F 500 Today, see how to replace the engine oil and oil filter on the Ktm EXC-F 500, performing routine maintenance. First, warm up the engine for a few min…
How to Replace the Fork Oil on a KTM EXC-F 500
How to Replace the Fork Oil on a KTM EXC-F 500
Exc F 500 In this video tutorial, you will learn how to disassemble and replace the fork oil on the KTM EXC-F 500 enduro bike in simple and quick steps. First,…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos