Do it yourself
Frequently asked questions about cars and motorcycles
In this video, you will see how to change the transmission oil, performing the regular maintenance service on a KTM 250 SX. First, position the bike on the stand and unscrew the oil drain bolt located under the engine, specifically behind the rear brake lever; allow the old oil to drain into a container for about ten minutes. At this point, clean the magnet on the end of the drain bolt from any metallic debris; then pour in the new engine oil, filling to the correct level!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sx 250 In this tutorial, you will learn how to perform routine maintenance by changing the engine oil on the KTM SX 250 enduro bike. First, drain the old en…
Sx 250 Today's main instructions will show us how to disassemble and replace the oil seal of the crankshaft of the KTM SX 250 enduro motorcycle. First, we p…
Sx 250 These brief and simple instructions will guide you on how to disassemble and replace the air filter of the KTM SX 250 engine. First, place the bike o…

How to replace the motor oil in the KTM Duke 250?

In this tutorial we can see how to replace the engine oil in the KTM Duke 250, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then place a container underneath it and open the cap of the fill hole. Next, locate the drain hole bolt, unscrew it using a socket wrench and remove the secondary filter, which should be cleaned and reinserted. At this point, open the main filter housing, insert the replacement, reassemble everything and pour the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos