Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Maintenance Service on a KTM EXC-F 500 (2021)

Model: Ktm Exc F 500
Part: Engine oil

This video is currently unavailable

Discover the steps to perform the regular maintenance service by changing the engine oil on a KTM EXC-F 500. First, unscrew the oil drain bolt located under the engine on the side, allowing it to drain into a container for about ten minutes. Next, unscrew the screw next to it to remove and clean the oil filter inside, as shown in the video.

Finally, open the filler cap to pour in the new engine oil of the correct type, filling it to the maximum level!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Perform the First Service on the KTM EXC-F 500
How to Perform the First Service on the KTM EXC-F 500
Exc F 500 In this video tutorial, you will learn how to carry out the first routine maintenance service by replacing the engine oil and oil filter on the KTM E…
How to Perform an Oil Change on the Ktm EXC-F 500
How to Perform an Oil Change on the Ktm EXC-F 500
Exc F 500 Today, see how to replace the engine oil and oil filter on the Ktm EXC-F 500, performing routine maintenance. First, warm up the engine for a few min…
Changing Engine Oil and Oil Filter on KTM EXC-F 500 (2021)
Changing Engine Oil and Oil Filter on KTM EXC-F 500 (2021)
Exc F 500 Let’s see how to perform routine maintenance by changing the engine oil and oil filter on a 2021 KTM EXC-F 500 enduro bike. First, remove the lower e…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos