Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Headlight

Follow this brief and simple guide for the steps to remove and replace the front headlamp of the Ktm Duke 390 motorcycle, as well as the 125. First, remove the original headlamp; to do this, unscrew the screws located above the front headlamp and disconnect the bulb's electrical connector found at the back, as shown in the video. At this point, replace and install the new front headlamp; insert it correctly and connect the bulb wiring, then secure it properly with its screws, following the video tutorial to the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on KTM Duke 390
Replacing Front Headlight Bulb on KTM Duke 390
Duke 390 In this video tutorial, we will see how to dismantle and replace the front headlight bulb on a KTM Duke 390. First, unscrew the screws of the headlig…
How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
Replacing and Refilling the Brake Fluid of the KTM Duke 390
Replacing and Refilling the Brake Fluid of the KTM Duke 390
Duke 390 In today's tutorial video, you will see the instructions for replacing the rear brake fluid of the KTM Duke 390, as well as the 125. First, remove th…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos