Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb on KTM Duke 390

Model: Ktm Duke 390
Part: Headlight bulb

Video tutorial

In this video tutorial, we will see how to dismantle and replace the front headlight bulb on a KTM Duke 390. First, unscrew the screws of the headlight located at the bottom of the instrument panel using a 5 mm hex key; then unscrew the side clips and lift the headlight out. At this point, remove the protective cover of the bulbs and disconnect the electrical connector; unclip the metal spring and replace the bulb with a new one of the correct type (in this case, H4). Then reassemble everything!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp on the KTM Duke 390?
How to Remove the Front Headlamp on the KTM Duke 390?
Duke 390 In this tutorial, you will see how to remove the front headlamp on the KTM Duke 390, a very simple and quick operation, necessary if you need to repl…
Replacing the Front Headlamp of the Ktm Duke 390
Replacing the Front Headlamp of the Ktm Duke 390
Duke 390 Follow this brief and simple guide for the steps to remove and replace the front headlamp of the Ktm Duke 390 motorcycle, as well as the 125. First, …
How to replace the license plate light of the KTM Duke 390
How to replace the license plate light of the KTM Duke 390
Duke 390 Today we will discover the instructions that will allow us to disassemble and replace the license plate light of the KTM Duke 390 motorcycle. First, …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos