Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on the KTM Duke 390?

Model: Ktm Duke 390
Part: Headlight

Video tutorial

In this tutorial, you will see how to remove the front headlamp on the KTM Duke 390, a very simple and quick operation, necessary if you need to replace the bulb or the entire unit. First, remove the bolt located on the top edge of the headlamp, then remove the other two bolts located on the sides.

Once this is done, separate the headlamp from the frame, disconnect the power connector, and proceed with replacing the damaged element. To replace the bulb, open the internal base by unscrewing each screw around the perimeter.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp of the Ktm Duke 390
Replacing the Front Headlamp of the Ktm Duke 390
Duke 390 Follow this brief and simple guide for the steps to remove and replace the front headlamp of the Ktm Duke 390 motorcycle, as well as the 125. First, …
Replacing Front Headlight Bulb on KTM Duke 390
Replacing Front Headlight Bulb on KTM Duke 390
Duke 390 In this video tutorial, we will see how to dismantle and replace the front headlight bulb on a KTM Duke 390. First, unscrew the screws of the headlig…
How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos