Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the KTM LC4 640 SM

Model: Ktm Lc4 640 Sm
Part: Clutch

Video tutorial

To replace the clutch on the KTM LC4 640 SM, first loosen the bolts securing the engine guard plate at the bottom of the bike. Once this plate is removed, you can loosen the screws securing the cover on the left side of the bike, accessing the components inside.

Here, you can loosen the screws securing the clutch discs, allowing the clutch to be completely removed from its housing. After removal, insert the new clutch and reassemble the cover and engine guard plate.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a KTM LC4 640 SM?
How to Replace the Air Filter on a KTM LC4 640 SM?
Lc4 640 Sm To replace the air filter on a KTM LC4 640 SM, loosen the screws securing the left side cover of the bike, just below the seat. Once the cover is rem…
How to Perform a Service on the KTM LC4 640 SM
How to Perform a Service on the KTM LC4 640 SM
Lc4 640 Sm Let's see how to carry out the regular maintenance service, including an oil change and oil filter replacement, on a KTM LC4 640 SM enduro bike. Firs…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos