|
Do it yourself
| |||
| ||||
Model: Ktm Exc 250
To replace the cylinder on the KTM EXC 250, you need to loosen the side bolts of the engine that connect it to the radiator via the appropriate hoses. Once these hoses are disconnected, you can unscrew the bolts that secure the cylinder to the bottom of the engine. Once the part is freed, carefully extract it from the top without damaging the piston. Once the cylinder is removed, you can insert a new one by connecting it to the hoses and the bottom of the engine using the appropriate bolts.
Updated on 19 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 250
To replace the piston of the KTM EXC 250, you need to loosen the screws that secure the cylinder to the top of the engine: this will allow you to com…
Exc 250
This guide will show you how to remove and replace the clutch master cylinder on the KTM EXC 250 enduro bike. First, place your bike on a stand and s…
Exc 250
Today's guide will show you the main instructions on how to disassemble and replace the exhaust valve on the KTM EXC 250 enduro motorcycle. To access…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |