Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 690
Part: Radiator

Today, we will see in this video tutorial how to remove and replace the cooling radiator of the KTM Duke 690 motorcycle. First, place the bike on its stand and start draining the coolant, allowing it to flow into a container for about ten minutes; then remove the rider's seat by unscrewing the screws, and unscrew the screws securing the radiator, as shown in the video. Now disconnect all the radiator hoses and the water temperature sensor; disconnect the electrical connector of the fan by unscrewing the screws to remove it!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Duke 690 In this video tutorial, we will see how to change the engine oil and oil filter on a KTM Duke 690, performing the regular maintenance service. First,…
Duke 690 This guide provides instructions to reset the maintenance light for the oil change on the KTM Duke 690. First, place your motorcycle on the stand and…
Duke 690 In this video, you will see how to perform a routine maintenance service by changing the oil and oil filter on a KTM Duke 690. First, warm up the eng…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos