Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the KTM Duke 690

Model: Ktm Duke 690
Part: Service warning light

Video tutorial

This guide provides instructions to reset the maintenance light for the oil change on the KTM Duke 690. First, place your motorcycle on the stand and turn on the ignition; then navigate to the settings on the onboard computer and use the indicator controls to scroll through the options until you reach the reset option for the engine oil light, as shown in the video.

Once the reset is complete, exit the onboard computer menu to save the changes, then start the engine!


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a KTM Duke 690
Replacing the Front Headlight Bulb on a KTM Duke 690
Duke 690 In this video, see how to dismantle and replace the front headlight bulb on a KTM Duke 690 in simple steps. First, remove the front headlight; to do …
How do you replace the motor oil in the KTM Duke 690?
How do you replace the motor oil in the KTM Duke 690?
Duke 690 To ensure that the oil change of the KTM Duke 690 takes place, you will need to unscrew the drain plug of the oil pan located in the central lower pa…
How to Replace the Brake and Clutch Levers on the KTM Duke 690
How to Replace the Brake and Clutch Levers on the KTM Duke 690
Duke 690 In today's tutorial video, you will see the steps to remove and replace the brake and clutch levers on the KTM Duke 690 motorcycle. First, place your…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos