Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean the Air Filter of the KTM SX 50

Model: Ktm Sx 50
Part: Air filter

Video tutorial

Follow this brief and simple guide for instructions on how to remove and clean the air filter of the KTM SX 50 engine. First, place your bike on a stand and start by removing the rider's seat.

Next, take off the plastic cover of the air filter box and then remove the foam air filter, as shown in the video. At this point, wash the filter (if too dirty, proceed with replacement); lubricate the foam filter and reassemble everything, applying the reverse procedure!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Sx 50 Let's discover in this short and simple guide how to perform the routine maintenance service for changing the oil on the KTM SX 50 enduro bike. First…
Sx 50 To replace the clutch on the KTM SX 50, loosen the screws securing the clutch cover panel located on the right side of the bike: once the screws are …
Sx 50 Let’s discover all the steps to perform the routine maintenance oil change on the KTM SX 50cc motorcycle, in simple and quick steps. First, position …

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos