Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 990sm

How to Replace the Rear Brake Pads on a KTM 990

Model: Ktm 990sm
Part: Brake pads

Video tutorial

To replace the rear brake pads on the KTM 990, loosen the nuts that secure the pin on the brake caliper, which holds the pads in place. Once these bolts are loosened, you can remove the corresponding pins and free the pads from the caliper.

At this point, insert the new pads into the caliper, then insert the corresponding pin and secure everything with the nuts; this will allow you to activate the brakes to ensure they function correctly.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on a KTM 990 SM LC8
Engine Oil and Oil Filter Replacement on a KTM 990 SM LC8
990sm This guide explains how to replace the engine oil and oil filter on a KTM 990 SM LC8. Obtain 3 litres of Motul 7100 SAE 10W60 oil and an HIFLO HF650 …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos