Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Crankshaft Oil Seal on the KTM Exc 500-F

Model: Ktm Exc F 500

Video tutorial

Today, we will see in this short and simple guide how to disassemble and replace the crankshaft oil seal on the KTM Exc-F 500 enduro motorcycle. First, place your motorcycle on a stand and begin to disassemble and remove the oil seal cover; then remove the sprocket by disconnecting it from the drive chain, as shown in the video.

Now, use a thin, pointed object to remove the crankshaft oil seal; install the new one, ensuring it is seated correctly. Finally, reassemble the sprocket and chain!


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a KTM EXC-F 500?
How to Change the Engine Oil in a KTM EXC-F 500?
Exc F 500 Changing the engine oil in the KTM EXC-F 500 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for t…
How to Change the Engine Oil on the KTM EXC-F 500
How to Change the Engine Oil on the KTM EXC-F 500
Exc F 500 In this video tutorial, you will see the main instructions for replacing the engine oil and oil filter, performing the routine maintenance service on…
How to Replace the Front Wheel of a KTM EXC 500
How to Replace the Front Wheel of a KTM EXC 500
Exc F 500 Today, in this brief and simple guide, we will provide instructions for removing and replacing the front wheel of the KTM EXC 500 enduro bike. First,…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos