Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 350 Ktm

How to Service the KTM 350

Model: Ktm 350 Ktm
Part: Checks and maintenance

Video tutorial

In today's video, we will see how to change the engine oil in the KTM 350. First, position the vehicle on axle stands. Proceed only with the engine cold, for safety.

Open the drain plug after placing a collection tray, and let the engine oil drain completely. Once done, we can refit the plug and proceed to replace the oil filter.

At this point, insert the new fluid according to the correct level indicated in the user and maintenance manual, then complete your work.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to replace the water pump gasket on a KTM SX-F 350
How to replace the water pump gasket on a KTM SX-F 350
Sx F 350 Today, we will discover the instructions that will allow us to disassemble and replace the water pump gasket on the KTM SX-F 350 enduro bike. First, …
How do you disassemble the engine of the KTM SX-F 350?
How do you disassemble the engine of the KTM SX-F 350?
Sx F 350 To disassemble the engine of the KTM SX-F 350, you need to loosen the screws that secure the engine block to its housing in the center of the frame. …
Replace the Engine Oil and Oil Filter of the Ktm SX-F 350
Replace the Engine Oil and Oil Filter of the Ktm SX-F 350
Sx F 350 In this brief and simple guide, follow the procedure necessary to replace the engine oil and oil filter while performing the routine maintenance serv…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos