Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a KTM Adventure 790 R

Model: Ktm Adventure 790 R
Part: Engine oil

Video tutorial

Regular engine maintenance should be performed at set intervals to ensure proper engine function. Here’s how to change the engine oil and oil filter on the KTM Adventure 790 R enduro bike.

First, place your bike on the centre stand and begin by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, unscrew the screws from the oil filter cover and replace the cartridge with a new one. Now unscrew the filler cap and pour in the appropriate oil, specifically a 10W50.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of the Ktm Adventure 790 R
How to Replace the Engine Oil and Oil Filter of the Ktm Adventure 790 R
Adventure 790 R Today, discover how to replace the engine oil and oil filter on the Ktm Adventure 790 R enduro bike by following these simple steps. First, place you…
How to Change the Engine Oil in the KTM Adventure 790 R?
How to Change the Engine Oil in the KTM Adventure 790 R?
Adventure 790 R As shown in this tutorial, changing the engine oil in the KTM Adventure 790 R is a straightforward task. First, wait until the engine is cool enough,…
How to Change the Engine Oil in a KTM Adventure 790
How to Change the Engine Oil in a KTM Adventure 790
Adventure 790 R As seen in this tutorial, changing the engine oil in a KTM Adventure 790 is a very simple and quick operation. Before proceeding, wait for the engine…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos